Industrial Automation
The family provides industrial connectivity capabilities for validated industrial automation requirements.
Explore application
1 / 4
Overview
12VDC PoE out DataIJG7001Power Supply IP Camera Laptop Data 12VDC IJG7001 PoE out Power Supply Wireless AP Ethernet Switch
Review the shared capabilities of the family, then select a model to see the characteristics that distinguish that ordering option.
- Multi-Protocol support Power over Ethernet is a convenient tool to simplify industrial network and IoT setups, and is now widely utilized in end devices such as wireless APs or IP cameras. The IJG7001 PoE injector supports IEEE 802.3at (PoE+) as well as the legacy IEEE 802.3af (PoE), so you can provide PoE power to virtually any device. Mode A and Mode B selection IJG7001 supports both Mode A and Mode B for 802.3af/at. Say goodbye to the hassle of finding the model type you need, and simply adjust IJG7001’s DIP-Switch setting according to your device. Durable hardware With strong EMC protection and a wide operating range, IJG7001 can be installed on machine-side to reduce the cost of power supply equipment and thus the overall cost of ownership.
- Supports 802.3af (PoE), 802.3at (PoE+)
- Up to 30W PoE power available
- Dedicated 12VDC power input
- Supports Mode A and Mode B, DIP-Switch selectable
- 2x 10/100/1000 BASE-T(X) ports (data in, data + PoE out)
- IP30 aluminum with DIP-Rail / Wall mount (optional)
Specifications
Shared technical capabilities
Specifications shown here apply at family level. Model-specific differences are identified in Models & Ordering.
- RJ 45 Transmission Rate
- 10/100/1000 Mbps
- PoE Voltage Booster
- Yes (Max support 30W)
- Input Voltage
- 12 VDC (power limitations)
- Input Current
- Max 3.6A @12VDC
- Max. Power Consumption
- 30W
- Housing
- IP30 metal housing
- Dimension (W x H x D)
- 32 x 110 x 90 mm
- Weight
- 340g
- Installation
- DIN-Rail , Wall mount (optional kit)
- Operating Temperature
- -40°C to +75°C (-40°F to +167°F)
- Storage Temperature
- -40°C to +85°C (-40°F to +185°F)
- Ambient Relative Humidity
- 5% to 95% (Non-condensing test @55°C)
FCCRoHS
Applications
Where this family fits
Application statements are derived from approved product literature and require engineering review before publication.
Models & ordering
Select the exact model
The selector highlights only what changes between variants. Shared specifications remain in the section above.
IJG7001
- Multi-Protocol support Power over Ethernet is a convenient tool to simplify industrial network and IoT setups, and is now widely utilized in end devices such as wireless APs or IP cameras. The IJG7001 PoE injector supports IEEE 802.3at (PoE+) as well as the legacy IEEE 802.3af (PoE), so you can provide PoE power to virtually any device. Mode A and Mode B selection IJG7001 supports both Mode A and Mode B for 802.3af/at. Say goodbye to the hassle of finding the model type you need, and simply adjust IJG7001’s DIP-Switch setting according to your device. Durable hardware With strong EMC protection and a wide operating range, IJG7001 can be installed on machine-side to reduce the cost of power supply equipment and thus the overall cost of ownership.
- Supports 802.3af (PoE), 802.3at (PoE+)
- Up to 30W PoE power available
Confirm the complete ordering code and regional availability with the responsible ATOP advisor.
Documents for IJG7001Downloads
Documentation validated for this family
Latest versions appear first. Protected engineering evidence requires an approved individual partner account.
Datasheet
Hardware Installation Guide (HIG)
No current file published.
User Manual
No current file published.
Firmware
No current file published.
Software Tools
No current file published.
CAD / STEP / DXF Drawings
Partner accessSign in with an approved partner account to view available files.
Partner loginDeclaration of Conformity
No current file published.
Certificates & Test Reports
Partner accessSign in with an approved partner account to view available files.
Partner login