Industrial Automation
The family provides industrial connectivity capabilities for validated industrial automation requirements.
Explore applicationActive2 models
EH2005/EH2006 Series
Industrial 5-Port Unmanaged Fast-Ethernet Switch with fiber optics, DIN-Rail mount, Plastic housing
1 / 3
Overview
EH2005 / EH2006 Industrial 5/6-Port Unmanaged Ethernet Switches EH2005-Fs EH2005-Fs EH2005-Fm EH2005-Fm Up 2 kmUp 20 km Single - Mode Multi - Mode
Review the shared capabilities of the family, then select a model to see the characteristics that distinguish that ordering option.
- The EH Series include 5/6-port Ethernet switches that provide two solutions, one with 6 RJ-45 ports and the other with 4 RJ-45 ports and one optic ST/SC port for your industrial applications. These EH series have been designed for industrial environments, such as in hazardous locations that comply with FCC, TUV, UL, and CE standards. EH series protect itself from receiving too many broadcast packets. During normal use, broadcast packets will be forwarded to all ports except the source port. However, EH series will discard broadcast or multicast packets if the number of those packets exceeds a threshold in a preset period of time. When the preset period expires (about 800ms), it will then resume receiving broadcast or multicast packets until the threshold is reached again. EH series provide 2 redundant power inputs that can be connected simultaneously to wide-range DC power sources. If one of the power inputs fails, the other live source acts as a backup to provide the EH series’ power needs automatically.
- 4 x 10/100BaseT(X) (RJ45)
- 1 x fiber port with ST (-Fm model) or SC (-Fs model)
- Broadcast storm protection
- Support IEEE 802.3/ 802.3u/ 802.3x
- Support 802.1Q/p QoS, prioritizing critical packets such as PROFINET packets
- 10/100M, Full/Half-Duplex, MDI/MDI-X auto-detection
Specifications
Shared technical capabilities
Specifications shown here apply at family level. Model-specific differences are identified in Models & Ordering.
- Transmission Rate
- 10/100Mbps
- Total Port
- 5 / 6
- Connector
- RJ-45 x 4+ Fm/Fs x 1 (EH2005-Fm/Fs) / RJ-45 x 6 (EH2006)
- Input
- DC 9 ~ 30V
- Consumption
- 5.4Watts Max
- Power Adapter
- UN315-1212 (US-Y): Y-Type power adaptor, 100~240VAC input, 1.25A @ 12VDC output, US plug, LV6
- Connectors
- ST | SC
- Max. TX Power
- -14 dBm | -8 dBm
- Min. TX Power
- -19 dBm | -15 dBm
- 10/100Mbps
- 5 / 6
- Auto MDI/MDI-X
- Yes
- Operating
- 0°C ~ 60°C ( 32º ~ 140ºF )
ULCEFCCRoHS
Applications
Where this family fits
Application statements are derived from approved product literature and require engineering review before publication.
Models & ordering
Select the exact model
The selector highlights only what changes between variants. Shared specifications remain in the section above.
EH2005
- The EH Series include 5/6-port Ethernet switches that provide two solutions, one with 6 RJ-45 ports and the other with 4 RJ-45 ports and one optic ST/SC port for your industrial applications. These EH series have been designed for industrial environments, such as in hazardous locations that comply with FCC, TUV, UL, and CE standards. EH series protect itself from receiving too many broadcast packets. During normal use, broadcast packets will be forwarded to all ports except the source port. However, EH series will discard broadcast or multicast packets if the number of those packets exceeds a threshold in a preset period of time. When the preset period expires (about 800ms), it will then resume receiving broadcast or multicast packets until the threshold is reached again. EH series provide 2 redundant power inputs that can be connected simultaneously to wide-range DC power sources. If one of the power inputs fails, the other live source acts as a backup to provide the EH series’ power needs automatically.
- 4 x 10/100BaseT(X) (RJ45)
- 1 x fiber port with ST (-Fm model) or SC (-Fs model)
Confirm the complete ordering code and regional availability with the responsible ATOP advisor.
Documents for EH2005EH2006
- The EH Series include 5/6-port Ethernet switches that provide two solutions, one with 6 RJ-45 ports and the other with 4 RJ-45 ports and one optic ST/SC port for your industrial applications. These EH series have been designed for industrial environments, such as in hazardous locations that comply with FCC, TUV, UL, and CE standards. EH series protect itself from receiving too many broadcast packets. During normal use, broadcast packets will be forwarded to all ports except the source port. However, EH series will discard broadcast or multicast packets if the number of those packets exceeds a threshold in a preset period of time. When the preset period expires (about 800ms), it will then resume receiving broadcast or multicast packets until the threshold is reached again. EH series provide 2 redundant power inputs that can be connected simultaneously to wide-range DC power sources. If one of the power inputs fails, the other live source acts as a backup to provide the EH series’ power needs automatically.
- 4 x 10/100BaseT(X) (RJ45)
- 1 x fiber port with ST (-Fm model) or SC (-Fs model)
Confirm the complete ordering code and regional availability with the responsible ATOP advisor.
Documents for EH2006Downloads
Documentation validated for this family
Latest versions appear first. Protected engineering evidence requires an approved individual partner account.
Datasheet
Hardware Installation Guide (HIG)
No current file published.
User Manual
No current file published.
Firmware
No current file published.
Software Tools
No current file published.
CAD / STEP / DXF Drawings
Partner accessSign in with an approved partner account to view available files.
Partner loginDeclaration of Conformity
No current file published.
Certificates & Test Reports
Partner accessSign in with an approved partner account to view available files.
Partner login