Power Substation
The family provides industrial connectivity capabilities for validated power substation requirements.
Explore applicationActive2 models
MB5908A/MB5916A Series
8-Port IEC61850-3 Certified Industrial Rack-Mount Secure Modbus Gateway, DSub-9 or TB5 connectors, Optional 3kV Serial Isolation, Dual Power input
1 / 6
Overview
MB5908A Series MB5916A Series 8 or 16-Port IEC61850-3 Certified Industrial Rack-Mount Secure Modbus Gateway Diverse Hardware Infrastructure Modbus Gateway supports the four most commonly used communication standards, RS-232/485/422(*), and Ethernet. The ease-of- use configuration utility provided with Modbus Gateway can quickly select the hardware interface , and easily switch to the existing communication infrastructure. Industrial EMC protection, IEC61850-3 compliance, and wide temperature operation capability render MB5908A/16A ready for every mission. Embedded Security and advanced features Relax. MB5908A/16A Modbus Gateway supports OpenVPN and IPsec VPN encryption, allowing you to safely use the device over the internet without worrying about malicious attacks, data sniffing or unintentional remote control of your Modbus slaves. On your LAN, RSTP protocol will provide an additional layer of security in case of link losses. * 3kV isolated version only supports RS-422/485
Review the shared capabilities of the family, then select a model to see the characteristics that distinguish that ordering option.
- Remotely access Modbus RTU/ASCII devices, convert to Modbus TCP
- Supporting advanced Modbus Features. Configuration via Web Browser
- IEC61850-3 certified, can be easily set up into IEC61850-3 substations
- Industrial EMC protection, wide temperature operation, -40°C-80°C
- Redundant Power Input for fault protection, either 24-48 VDC or High- Voltage AC/DC (100-240VAC or 100-370VDC)
- 6 Fast-Ethernet interfaces, either RJ45 or SFP slot
- 8 or 16 RS-232/RS-485/RS-422 Serial ports, with or without isolation
Specifications
Shared technical capabilities
Specifications shown here apply at family level. Model-specific differences are identified in Models & Ordering.
- Connector ports
- RJ45 x 6 (RJ45 version) SFP x 6 (SFP version)
- Connector
- D-Sub9 (DB models, supporting only 5-pin RS-232 mode) or 5.08mm 5-Pin Terminal block (TB Models)
- Ports
- 8 (SE5908A) or 16 (SE5916A)
- Serial port isolation
- 3 kV isolation (SiS version only)
- Baud Rate
- 1,200-921,600 bps software selectable
- Rated Supply Voltage
- Redundant 24-48 VDC or Redundant 100-240 VAC/ 100-370 VDC (HV Series)
- Input Voltage Range
- Redundant 19.2-52.8 VDC or Redundant 85-264 VAC/ 100-370 VDC (HV Series)
- Input Current
- 0.73 A @ 24 VDC 0.35 A @ 100 VAC 0.20 A @ 100 VDC
- Power Consumption
- Approximately 20 W
- Power Redundancy
- Yes
- Reverse Polarity Protection
- Yes
- Housing Dimension (W x H x D) Weight Installation Reset Button
- IP30 SPCC housing 440.6 x 44 x 309 mm (1U Rack-mount) 4 kg 19” Rack mount (Rack-mount kit included) Yes
IEC 61850-3IEEE 1613FCCRoHS
Applications
Where this family fits
Application statements are derived from approved product literature and require engineering review before publication.
Models & ordering
Select the exact model
The selector highlights only what changes between variants. Shared specifications remain in the section above.
MB5908A
- Remotely access Modbus RTU/ASCII devices, convert to Modbus TCP
- Supporting advanced Modbus Features. Configuration via Web Browser
- IEC61850-3 certified, can be easily set up into IEC61850-3 substations
Confirm the complete ordering code and regional availability with the responsible ATOP advisor.
Documents for MB5908AMB5916A
- Remotely access Modbus RTU/ASCII devices, convert to Modbus TCP
- Supporting advanced Modbus Features. Configuration via Web Browser
- IEC61850-3 certified, can be easily set up into IEC61850-3 substations
Confirm the complete ordering code and regional availability with the responsible ATOP advisor.
Documents for MB5916ADownloads
Documentation validated for this family
Latest versions appear first. Protected engineering evidence requires an approved individual partner account.
Datasheet
Hardware Installation Guide (HIG)
No current file published.
User Manual
No current file published.
Firmware
No current file published.
Software Tools
No current file published.
CAD / STEP / DXF Drawings
Partner accessSign in with an approved partner account to view available files.
Partner loginDeclaration of Conformity
No current file published.
Certificates & Test Reports
Partner accessSign in with an approved partner account to view available files.
Partner login